westonuk002063.jpg westonuk002062.jpg westonuk002061.jpg westonuk002060.jpg westonuk002059.jpg westonuk002058.jpg westonuk002057.jpg
QUICK GUIDE
FUEL
RCV ENGINES
E.D ENGINES
WEBRA ENGINES
A.P ENGINES
MAGNUM ENGINES
WEST ENGINES
TUNED WEST 4 STROKES
FIRE EATERS
FUEL REGULATORS
E.D ENGINES
GLOW PLUGS

ENGINE ACCESSORIES

WEST RECEIVERS
WEBRA ELECTRONICS
WEST ELECTRONICS
JACKPOWER LIPOS
BATTERY PACKS
CHARGERS
RUNTRONIC IGNITION
ARTF AEROPLANES
COMPASS HELICOPTERS
HELI BLADES
GENERAL ACCESSORIES 
CARBON ACCESSORIES
PROPELLERS
GLUE
GENESIS EXHAUSTS
Terms & conditions
Recommended West 52T2
and Genesis minipipe
ARF.05 Hype 3D ARTF kit 194.99

TSH.03 Genesis Hype minipipe, for West 52T2 46.94

TSH.05 Deal inc. Hype ARTF, West Eurotech 52T2 and Genesis minipipe 377.30

TSH.10 West Eurotech 52T2 and Hype minipipe 198.92

WEM.55 West 550kv motor 94.99

WEC.85 West 85A ESC 54.43

APC.10 12 1/4 x 3 3/4 APC prop (for a more snappy throttle response for 3D) 6.49

APC.11 13 X 4w APC E PROP 10.73

APC.12 14 x 7E APC E PROP 6.64

APC.40 16 X 8 APC E PROP 9.99
westonuk098006.gif westonuk098007.gif westonuk098008.gif westonuk098012.gif westonuk098013.gif westonuk098014.gif westonuk098015.gif westonuk2002026.jpg westonuk2098020.jpg
EASY TO TRANSPORT WITH A TWO PIECE WING
The new Hype 3D has a two piece wing for easy transportation and is put together with a single interlocking bolt into the fuselage. With its superb new light ply and balsa construction the Hype 3Dr is extremely light and strong and amazingly agile for its size making it ideal for experienced aerobatic pilots and even for the first time low wing trainer with the rates lowered. The wing section has been raised in-line with the staberliser for un-coupled knife edge and superb upright high alpha manauvers. With the provesion for electric in place uterlising the air scoopes provided and the necessary cut away cooling areas in the airframe and electric motor box makes this a beatifull electric plane on either 4 or 5 cell lipos. For easy install we have a top opening hatch wich gives easy access to servos and tank / batt tray and also included pre installed tubes for the close loop control wires which makes a very easy install. The Hype will perform great hovering aerobatics and combined with the recommended West Eurotech 52T1 and Genesis Mini pipe or electric set up makes an unbeatable package.
westonuk2098014.jpg
Recommended West electric set :- 550 kv motor and 85A ESC
westonuk098015.gif westonuk098015.gif westonuk098015.gif
WES.SP.HIGH/P.02
SERVO PACKAGE DEAL HIGH PERFORMANCE
4X Hitec HS5645MG, 1X HS311, 1X 6v AA 1900mAh Eneloop, 1x switch harness 154.00

WES.SP.STANDARD.02
SERVO PACKAGE DEAL STANDARD PERFORMANCE
4X Hitec HS645MG, 1X HS311, 1X 6v AA 1900mAh Eneloop, 1x switch harness 126.00

westonuk098015.gif westonuk098015.gif
HYPE 3D
 WINGSPAN: 1520MM
 LENGTH: 1560MM
 WEIGHT: 2.2KG
SERVOS: 5
ENGINE: 52 2 STROKE
(WE DO NOT RECOMMEND
USING A 4 STROKE)

ELECTRIC:
OUTRUNNER 590KV
LIPO: 4/5 CELL 4500MAH

THE HYPE 3D KEY FEATURES:

TWO PIECE WING SECTION
WING CORD LINE RAISED INLINE WITH STABERLISER CORD LINE CREATING UN-COUPLED KNIFE EDGE CAPABILITIES AND GREAT HIGH ALPHA UPRIGHT MANAUVERS. TOP OPENING HATCH.
ELECTRIC OR I/C READY.
CLOSSED LOOP TUBES FOR EASY INSTALATION.
STRONGER FUSELAGE CONSTRUCTION.